The wire rod is produced according to the following standarts:

 Wire rod of carbon steel of ordinary quality as per GOST 30136-95 (DSTU 2770-94);

Steel grade as per
GOST 380-94
Mass fraction of elements, %
C Mn Si S P Cr Ni Cu
      max max max max max
1KP 0,06-0,12 0,25-0,50 max 0,05 0,050 0,040 0,30 0,30 0,30
3KP 0,14-0,22 0,30-0,60 max 0,05 0,050 0,040 0,30 0,30 0,30
3PS 0,14-0,22 0,40-0,65 0,05-0,15 0,050 0,040 0,30 0,30 0,30

 

Steel grade Mechanical properties
Ultimate tensile
strength, N/mm2, max
Relative contraction,
%, min
Mass of scale,
kg/t, min
1KP 430* 66 10
3KP/PS 540 60 10

 

 Wire rod as per American standard ASTM A 510M.

Steel grade Mass fraction of elements as per ladle analysis, %
C Mn S (max) P (max) Cr (max) Ni (max) Cu (max)
SAE 1006 max 0,08 0,25-0,40 0,050 0,040 0,15 0,15 0,30
SAE 1008 max 0,10 0,30-0,50 0,050 0,040 0,15 0,15 0,30
SAE 1010 0,08-0,13 0,30-0,60 0,050 0,040 0,15 0,15 0,30

 

Si - as per agreement with a customer.

Steel grade Mechanical properties
Ultimate tensile strength, N/mm2, max Elongation, %, max
SAE 1006-1010 * *


[SIZES] Ø 5,5 - 12,0 mm

Packing: in coils of 1100-1500 kg, 1500-2100 kg.
The height of a coil is up to 1500 mm, 1750 mm; OD - 1250 mm; ID - 850 mm.
Binding with wire rods diam. 5,5-7,0 mm: 4 radial bindings and 1 transverse binding.



Wire rod Ø mm as per GOST 30136-95 can be also packed in coils up to 550 kg.
Dimensions of a coil: height up to 400 mm; OD - 1400-1450 mm; ID - 850-900 mm. Binding at 2 places.